Search results

  1. nate94gt

    Metal servo horn for 1/18 temper?

    i never upgraded my servo horn, I did upgrade the servo though. so I cant really help you, but a lot of aftermarket servo horns have multiple holes for length
  2. nate94gt

    issues with motors blowing

    I vent all my tires. its crazy what can get in there from the inside. dust and water = mud.
  3. nate94gt

    issues with motors blowing

    yeah, also a good point.
  4. nate94gt

    Servo Issues

    I wonder if you were having a brown out and you need BEC for the servo to supply proper voltage (6v for that servo)
  5. nate94gt

    "New" to RC... Educate me (Please)

    - Batteries.. The stock one is a 1800mAh 2S 20C lipo and the "upgraded" one is a Lectron Pro 5200mAh 35C. Also a "2S".. The kid at the hobby shop did a poor job of explaining it to me. Other than "this one is better than this other one and lasts about 15 min longer". The mah is the amount the...
  6. nate94gt

    Barrage 1/12 BTD or New 1/24?

    Fwiw I use my big crawlers a lot more than my small ones
  7. nate94gt

    New motor for temper crawler 1/18

    yup. everything else stays the same.
  8. nate94gt

    New motor for temper crawler 1/18

    I installed a dynamite tazer 280 in mine. Way better! but you'll have to buy a new pinion gear to fit or take some material off the motor shaft and grind a small flat spot to make the pinion fit on that one.
  9. nate94gt

    Motor Overheating

    Agreed on getting an actual temperature of it really is overheating, You could try dropping the pinion another couple of tooths. In my scx10 II, I went from the stock 15 down to an 11 and it's still hot lol. I need to do some more work to get it figured out, but luckily for me those brushed...
  10. nate94gt

    Help With Servo Installation

    practice, get a new transmitter that has adjustable dual-rate, or get AVC
  11. nate94gt

    Need an new servo for Ruckus

    this is a strong servo. http://www.ebay.com/itm/Power-HD-1501MG-25T-17KG-Torque-Servo-for-RC-Robot-/322039488498?epid=823138781&hash=item4afb0c9ff2:g:Bu4AAOSwv9hW52P7
  12. nate94gt

    Body hitting tire

    You could buy some steel wheels to add weight on the corners. I put 1.9s on mine
  13. nate94gt

    Roost only has power at front wheels

    make sure the rear driveshaft is spinning. If it is, then you'll proably have to take the differential apart. I had to do that on mine and I had to shim the gears so they made better contact.
  14. nate94gt

    ecx ruckus or temper

    another thing you can do for the torque twist is to flip the motor around.
  15. nate94gt

    Anyone running a barrage?

    I don't and haven't heard too much about them, but from what I have heard, they are a fun truck, not quite as capable as an SCX or Trailfinder. there have been a few vids that popped up on youtube, you should check them out
  16. nate94gt

    Anybody building their own 1:24 temper chassis's?

    id like to but don't have the tools or anything.
  17. nate94gt

    Anybody else build scale trucks from the tempers?

    Dang man, that's impressive. I made a crappy scaler w/ my 1/24th temper.
  18. nate94gt

    transmitter help

    Will your d2xe bind with the roost?
  19. nate94gt

    transmitter help

    The amp has a receiver and ESC in one unit. The only way to use the stock one would be with a new ECX amp receiver. Or you could buy a new ESC, receiver, and transmitter, whatever brand you would like. Edit. Since you have a tactic transmitter, all you would need would be a new ESC and a tactic...
  20. nate94gt

    Best mods under $50

    And receiver, yes
Back
Top