Search results

  1. S

    Graduated from amp to ruckus

    Rpm servo saver eliminator, metal turn buckles, savox high torque metal servo, metal horn. The aluminum hubs are nice.
  2. S

    installed RPM SSE and new mg servo, now truck steers itself

    Check your servo saver. Check your tires and make sure they are tight. Check your bearings make sure they spin freely/bearing hubs not getting hot.
  3. S

    ECX Ruckus lipo and charger advise

    maybe this will help??? might be the best http://www.ebay.co.uk/itm/NEW-Venom-Pro-Duo-LiPo-NiMH-Battery-Charger-0685-/291933512512?hash=item43f897e340:g:sf4AAOSwnbZYHNuZ
  4. S

    ECX Ruckus lipo and charger advise

    Or towerhobbies Not sure what you want specifically. Do you want brick and mortar?
  5. S

    ECX Ruckus lipo and charger advise

    Amazon.
  6. S

    ECX Ruckus lipo and charger advise

    Venom pro duo.
  7. S

    What did you buy today?

    Fast eddy bearing kit for 4wd ruckus. Traxxas big bore shocks. 35 weight shock oil.
  8. S

    Torque and gearing revelations on a 4000 kv

    I would use hardened steel, not aluminum.
  9. S

    Tacon 3500kv

    team associated sc10 4x4 slipper.
  10. S

    Torque and gearing revelations on a 4000 kv

    The only other thing you can do is try to make a inner lip to put a seal in.
  11. S

    Graduated from amp to ruckus

    No. I run a 2s on a completely stock boost and for a while a completely stock torment. 3s broke everything. I also run a 2s on a completely stock brushless ruckus. When I first ran the ruckus (out of the box, put battery in and go) I stripped the wheels within 15 minutes. 2s you are fine. 3s...
  12. S

    Torque and gearing revelations on a 4000 kv

    Oil or different metal with higher melting points (then you would have to worry about plastics melting). Heavier teeth for more metal composition per tooth, maybe mod1
  13. S

    Graduated from amp to ruckus

    Ecx aluminum hexes. If you don't want to glue tires to hexes or constantly replace wheels, this is a must. Probably the single most important upgrade I did.
  14. S

    installed RPM SSE and new mg servo, now truck steers itself

    Avc will cause wheels to steer when tilting the vehicle right or left when holding the vehicle by the front bumper.
  15. S

    What did you buy today?

    Savox servo, axial servo horn, ecx aluminum 4wd servo saver, traxxas turnbuckles, hot racing metal mod 1 spur, slipper pads, ecx plastic spur, and a pit stand Should of went for more cow bell.
  16. S

    Tacon 3500kv

    Try this from team associated ASC91096. May have to drill out a little. This is a 32p not a 32dp. Don't know what dp is.
  17. S

    Tacon 3500kv

    Don't know. What pitch are your gears? That would tell you what spur you can and can't get.
  18. S

    Brushless runs hot...advice

    While not at walmart, not really fancy. https://www.amazon.com/gp/aw/d/B019TRGYW2/ref=mp_s_a_1_5?ie=UTF8&qid=1497228362&sr=8-5&pi=AC_SX236_SY340_QL65&keywords=infrared+thermometer+gun&dpPl=1&dpID=41Y5W8Q-7aL&ref=plSrch
  19. S

    brushless upgrade on ECX Ruckus

    4wd uses the "mod1" pitch. 2wd is 48p
  20. S

    Metal cvd for ruckus

    My only issue is that I stripped the hexes it came with. Can't fault the axles there but come on, they sell better replacements for that axle.
Back
Top