Gen 2 suspension geometry

[Lazlo]

I got the ecx temper gen2. I've already broken an axle, and both driveshafts. I have metal replacements for both. But, my question is there's 3 positions for the upper links, and 3 front/4 rear positions for the shocks.

What's best for a stock rig, or I'm planning on getting 4.75" tires with heavier wheels. I also got some light weight shock oil (15w). I'd like a lot of flex, not concerned about flat ground at all.

 

[Mash1956]

Following

 

[Powerram50]

Anyone have any insight?

 

[Gaholley]

not sure about the upper links, since the lower links do not have more holes. (won't the axles roll some if you were to move only the top links?)
I like the shocks in the lowest holes to lower the vehicle and give less lift, I removed the bottom shock cups altogether and now it sits nice and low. belly dragging works good for me.
i did get 4.75 tires, 19 tooth pinion on a 37 turn motor, but still want to gear down more.