transmission

So I stripped out my differential Stripped differential by tastyville posted Jun 21, 2018 at 9:27 PMNo, it's not the slipper clutch or the metal gears inside or the spur or pinion gears. Inside the transmission case were about a hundred metal shavings Stripped differential 2 by tastyville posted...

what transmission fluid weight should I use in the amp MT

All, recently bought an 1/18 Ruckus. On day 3, the right rear wheel was not spinning. After a full break down, found that one of the gears in the rear transmission had a double-d slot which had stripped out and was causing the screw to back off under any torque conditions. This effectively...

Are there any steel idler gears the would fit in the ruckus I always crack them. My plastic spur won't give from these bad crashes.

I recently installed metal gears in the transmission and upon running my torment the motor fried. I placed a new motor in and noticed it was not spinning freely, so I loosened the front screws and it works now. What Did I Do Wrong??????????

So I pull the trigger and something is spinning but it isn't the wheels! Where do I attack this from looking at the truck from the rear...the left side or the right side or does it matter? I'm assuming there's a gear stripped somewhere in the transmission.

I installed the ECX metal transmission gear set yesterday. I did not lube the gears, as the stock ones looked dry. Should I have added some?