Front a arm hinge pin replacement for ecx amp 1/10 mt

[Rc4me]

Front Bulkhead for RC10B5 & B5M (ASC90003 it fits perfectly on the ecx amp I broke mine and couldn’t find a new one literally anywhere all you have too do is grind or file down the one side and it fits perfectly not 6 screws like stock but 4 still able too put the stock bumper on as well front end still feels super solid​

 

[Aunion]

Nice to hear things like that, even more when ECX spare parts are more and more difficult to find. Would you mind to share some pics? Thanks in advance, cheers from Madrid, Spain!

 

[slick2500]

@95PGTTech has a thread somewhere on here where he tested a bunch of other bulkheads.

 

[Aunion]

https://www.ecxforum.com/threads/amp-front-bulkhead-ecx1092-workaround.3714/post-25965

Here we have it. I thought that the Amp shared the same bulkhead with the rest of the 2WD line. Nice info here.

 

[slick2500]

https://www.ecxforum.com/threads/amp-front-bulkhead-ecx1092-workaround.3714/post-25965

Here we have it. I thought that the Amp shared the same bulkhead with the rest of the 2WD line. Nice info here.

IIRC the Circuit, Boost and Amp all used a different bulkhead and rear shock tower.

 

[95PGTTech]

IIRC the Circuit, Boost and Amp all used a different bulkhead and rear shock tower.

the Amp Buggy I know has a different rear shock tower I had to get it. It does not have the body mount posts on the top, and has extra provisions for the rear wing mounts to come off of it facing rearward (seperate parts wing and mount).