Fordy_c
Member
- Messages
- 19
Alright guys
So after a bit of help, my knowledge of rc cars isn’t great.
I’m using a spektrum s6020 servo and up until today everything was fine.
The car now won’t go in a straight line, even with the steering trim all the way over it’s still pulling to one side.
I’ve just taken the servo off and took the top off it and when idling its kind of ticking/humming and you can see the one plastic gear slightly move on it’s on back and forward. Only a cog or 2 though.
Any ideas guys? Is the servo knackered, it’s pretty new or could I have a problem with the spekrum srs200 receiver?
any ideas would be helpful
Cheers
So after a bit of help, my knowledge of rc cars isn’t great.
I’m using a spektrum s6020 servo and up until today everything was fine.
The car now won’t go in a straight line, even with the steering trim all the way over it’s still pulling to one side.
I’ve just taken the servo off and took the top off it and when idling its kind of ticking/humming and you can see the one plastic gear slightly move on it’s on back and forward. Only a cog or 2 though.
Any ideas guys? Is the servo knackered, it’s pretty new or could I have a problem with the spekrum srs200 receiver?
any ideas would be helpful
Cheers
