driveshaft

I made an impulse buy yesterday and bought a 1/18 Ruckus 4WD truck for my kids (and myself) at a local hobby shop. Long story short, hit a tree and now one of the driveshafts is broken. I’m new to RC and I’m quickly learning that this particular scale model doesn’t have a lot of options in...

Hi everyone, Does anyone know how to fix a slipping driveshaft spindle? At the hub of my 1/18 Roost where the metal driveshaft molds into the plastic, the metal is just slipping around allowing the plastic part of the driveshaft to spin but not the metal part with the wheels on. 2 have gone...

Ok so I have a 2wd torment been bashing for awhile an looking for steel drive shafts an I can NOT FIND any from hot racing only CHINA stuff. Has anyone tried any other metal drive shafts for a traxxas etc and had any luck. Also has anyone locked the diff on it an was it worth it. An a good list...

So i have broken some driveshafts on my ECX AMP MT and i am looking into getting metal driveshafts for the slash 4x4 (rear) and i have heard they fit ecx trucks. Are the bearings on the ecx amp axle carriers a different size then the ones on the slash 4x4? So theoretically, i would only need to...

I have a 3000kv brushless ecx amp with all steel transmission and spur gear. But the driveshafts snapped and im not sure what upgrade i should get and i cant find any hot racing ones that aren't either out of stock or discontinued.

After i put a brushless motor in my temper it almost immediately snapped the front driveshaft. I found some short metal driveshafts on ebay, but only one side fits. Is there any driveshafts that fit without modifications? Or can i use barrage outdrives? The barrage outdrives look to be longer. I...

Working on my ruckus, 1/10 2wd. Was originally a brushed, now running a castle brushless. Broke the stock driveshafts, of course, and now looking for better ones. There’s 3 different styles of hot racing and none of them seem to have overwhelmingly positive reviews. Any of the 3 worth getting...

Anyone find a good driveshaft replacement for the temper? Will any mrc Driveshafts work on the temper? Also, does anyone have some decent shock recommendations that aren't too expensive?

Where can I get after market front drive shafts or know anyone that has them?

just checking to see if anyone has purchased any aftermarket steel driveshafts for their 1/18 Temper, if you can provide a link it would be much appreciated!!

I know bodies are a hot topic as the stock one isn't very strong and the size / shape of the car make it hard to find compatible ons. Here's the body of the FTX Bugsta (17.90€). Some small hobbyking body posts extensions in the rear and 4 holes later it's looking good! Amp baja bug body from...

broke driveshaft on 2wd torment, anybody know of a metal or aluminum replacement? As things break i'd like to upgrade parts, but i'm only seeing plastic on the websites that i look at for parts. Thanks

So I've recently upgraded to a 2150kv Brushless motor, with an 80amp ESC. Evrything runs good and works perfect, except for the clutch. I have the hex nut maxed out in tightness, but yet it still slips. You cant punch the throttle without it slipping. But i can ease into top speed. Im really...

Something in the drive train is constantly broken on both my Circuit 2WD trucks with upgraded brushless motors. With the original plastic drive shafts there were two points of failure. The first point of failure was at the axle that connects to the wheel. The parts have a plastic part that...

I see all the different drive shafts on the internet but most are for 2wd. What can I use for the front other than stock?

I want to remove a pivot ball from my drive shaft. What is the best way ?

I've broken several front driveshafts and front axles on my 1/10 4x4 Ruckus. Running stock motor with (non 3S restricted) Dynamite Tazer 45A ESC with 3S and stock tires. What brand driveshafts are you using? Which ones are the most durable? For installation, please explain any mods that may...

I have a ECX Circuit 2WD with a brushless motor upgrade and upgraded motor shafts. I'm trying to diagnose a problem and I need to remove the drive shafts. The pin that connects the drive shaft to the motor is sheared in two. I attached a photo of the tiny hex head on my white table. Most of...

hey, i have been pretty happy with my ECX Boost so far. some hiccups I have had were mainly the driveshafts, after running and small jumps, the driveshafts would fall out or even snap off. what I'm looking for is if there are any driveshafts that are better then stock for the ECX boost buggy. I...

does anyone if these will work on my temper!!??