Shocks upgrade for ECX Amp MT?

[RazorRC]

They are old Losi springs I had from another project. Unfortunately they are discontinued. One thing that I've found works pretty well is Losi +4mm spring retainers with the current Losi 12mm springs.

https://www.amainhobbies.com/team-losi-racing-22-3.0-spring-cup-set-standard-4mm-tlr233021/p475090

https://www.ebay.com/p/Team-Losi-Ra...6W6avIfXq9hWd7FLzpJTv_EZZyXPZGwkaAnRxEALw_wcB

Nice! The top shock collars will work with 12mm springs?

 

[MaX-D]

Nice! The top shock collars will work with 12mm springs?

There is a little play with the spring on the top collar. It's not a snug fit. I had to tighten up the spring to make it snug

 

[Kaydenking]

Ivan,here you go

View attachment 4973

Will these work on the desert buggy ??

 

[Johnnypneumonic]

I recently bought and installed a pair of front shocks for an aarma mega/blx vehicle. Shock part number AR330550 and spring part number AR330459. Installed these on the rear of my amp db and drive much better than stock and better than the slash rear shocks I’m taking off.

 

[slick2500]

I recently bought and installed a pair of front shocks for an aarma mega/blx vehicle. Shock part number AR330550 and spring part number AR330459. Installed these on the rear of my amp db and drive much better than stock and better than the slash rear shocks I’m taking off.

The front shocks from the Granite work great on the rear, I actually use them on my Stampede 2wd, for the fronts get the front shocks off the Vorteks 4x4 check out Jenny's rc they usually have them for the best price.

 

[Johnnypneumonic]

I’m not sure the aarma shocks would clear the camber link in the front.