esc

  1. psyblade

    Stock Temper and wet mud/water

    Is ECX Temper safe to use on water or wet mud tracks?
  2. BabyDyke415

    Please help, need suggestions for comb packs

    I am looking into esc, servo, and motors... is it better to get this as a combo pack? I have the ECX AMP MT... There are also so many different brands that I am lost!! I want to drive 40mph and have plenty of torque for bashing and jumping. I want to switch to LiPo eventually and I want to be...
  3. Briguy

    3 cell LiPo in 2wd Ruckus?

    Can i run a 3cell in a 2wd ruckus with a 5xl traxxas esc?
  4. C

    Help me setting up the Tazer Brushless ESC (Ruckus 4WD)

    Hi, I bought a new Ruckus 4WD Brushless AVC. But it drove rather slow forwards, and fast backwards. Throttle trim and AVC was both set to zero, so I thought I had to re-calibrate the users manual: Done. Done. I do, but the green LED continues flashing after I release the SET button. It stops...
  5. zarthsan

    Huge throttle/reverse delay with Kinexsis motor/ESC (KXSS0500) and AMP DB

    I'm relatively new to RC cars and have an AMP DB and an AMP MT. Recently, the MT's steering-servo crapped out, and, while I was repairing that, I decided to upgrade the ECS/Motor to one that could naively support LiPO without the need for a Low-voltage-alarm. $120 later, I had the titanium...
  6. E

    Ruckus Troubleshooting Help - Motor/ESC???

    Hey all. I'm new to the forum but have been lurking for a while and gained a ton of knowledge. Thanks to all for the great information. I originally bought the 1:10 Brushless Ruckus for my son but had so much fun we bought a used Slash for him so we can both run the cars. Total blast and...
  7. Briguy

    Not communicating

    I have a 1/10 ruckus and I am getting no communication between the remote and truck. i bought a new esc, same problem. Any ideas? Thanks
  8. Chuck1906

    Possible motor issues?

    My son took his Ruckus out over the weekend and not even a good 10 minutes into him playing with it, the truck died. He wasn't even driven it hard either. I always charge our batteries up before we go out to drive our trucks so I knew the battery wasn't dead. When I squeezed the trigger, the...
  9. tammagotchie

    ECX AMP new motor

    Is there a good replacement motor for ECX AMP? carson cupmachine for example or what options do i have? for now i am not going for brushless.... so what brushed motor would be the best option?
  10. nate94gt

    Fried the ESC in my Roost. Options?

    I bought a roost a couple of weeks ago. ive only run, maybe 2 batteries through it (2000 20c 2s lipo). The slipper wasn't working so the rear differential took a lot of abuse and was clicking. So I took it apart, shimmed the gears, and put it back together. When I went to go drive it, I...
  11. M

    Got a torment with no reverse!

    We just bought an ECX torment but it won't go reverse. Not sure how to change this goes forwards left and right. It slows down but it won't go reverse. Hasn't come with a binding pot either
  12. MADitto

    Thermal Shutdown

    So after a good run session with my son. I brought the tuck back in to go out for dinner. I noticed that motor and ESC were very hot. I forgot my temp meter so I have no idea of what it was. But I could say it was past the two second finger method. When I got back I finished replacing the...
  13. Superducky

    Good brushless setup

    Hey all, It is time.....time to upgrade the torment to a brushless system. So using the expierience of you wise men and women I thought to ask you all what is the best setup(in your opinion) for the ecx torment. I bash 99.99% of the time to torque is what im looking for but with a good amout of...
  14. Shagz

    Hobbywing 1060 esc

    I'm having trouble uploading pictures but I had to relocate the receiver from the front to the back by the esc because the cord was too short from the esc. Is they're an extension and would this cause a problem with the receiver (water and dust)? Sorry this is on a torment
  15. mdanielswv18

    Esc help

    I had to replace my esc today with a new one. I just put another oem one in. Now when you go forward then hit reverse it brakes instead of going to reverse. You have to pull trigger twice to switch direction. Any ideas?
  16. S

    Gone bad

    how can I tell if my speed control is bad or motor?
  17. M

    ECX Amp Beep Codes?

    For some reason my Amp MT won't work randomly today. Tried with two batteries, car turns on fine but when I turn on the TX all I get is beep-pause-beep-pause and the ECX is flashing red. There's no re-bind procedure that I can see so I have no idea what or where to go next.
  18. S

    new revenge esc wont hold a 4s!!

    I got a revenge because ECX is tuff against breaking, but only because they say 4s will work with ESC, just change the motor, not so anymore, they changed firmware to make it impossible to run a 4s with ESC, even if you change to the 1800 dynamite motor..kinda disappointed with this!!
  19. i_r_beej

    HobbyWing Justock ESC is "cogging"

    Holy mother of pearl... So my HobbyWing ESC is acting up. Not sure if it's the ESC, sensor wire, motor or the battery. When I first apply just a touch of throttle, the motor starts to stutter. I guess this is what "cogging" is, eh? According to the ESC manual, it's set by default for a pretty...
  20. Tat2dFr3ak

    ESC, Transmitter, Receiver options ECX Amp?

    So heres my question since i have limited funds currently ( buying a house ) what are some of my options for an ESC / Transmitter / Receiver for my Amp and its 20t motor i have looked around ebay and a lot of this is greek to me. Only reason i want to stick with the 20t motor is because i want...
Back
Top