ruckus

I just put in new metal gears and spur new esc and brushless motor set everything up made 2 passes up and down street now my ruckus will not go when tires are touching the ground also put new slipper in and so took everything back apart and nothing is broke motor and esc never even got warm...

Whole new bird to me. Kind of why I got it and was real curious to use the avc feature. I like it. It has a a lot of pros and some cons. Getting to tube this thing is not going to be easy as they don't make things cut and dry. The slipper clutch, buried under 20 screws!!! And the motor mesh...

My jx servo just craped out on me today and I'm looking for a new servo. I just want something that will last more than a month. Less than $30, reasonably quick, dual bearings and if possible metal gears. It is going in my ruckus so it needs to be strong.

Hello I have found my old Ruckus ( 2WD ECX2100 http://www.ecxrc.com/Products/Default.aspx?ProdID=ECX2100 ) but i didn't found battery could someone help what battery to get (one that i could charge with original charger ) best would be if i could buy it in this shop (translated for you =...

So I have a circuit and a ruckus 2wd on both, has stock 87 tooth spur gear, i have put a 3650 3500kv in the ruckus with the stock 18 tooth pinion the truck just chugs and will not move, i was hoping you could help with gearing I think it is a gearing issue as it seems as i need more torque since...

Well I'm finally gonna make switch to lipo power. I know I need a balance charger and I know I need to reset the lvc on the esc. It already has metal gear tranny. What else do I need to account for? --Different pinion gear or spur gear? --Can plastic driveshafts handle 2s lipo? --Anything else I...

Alright so I got everything in to the ruckus 4x4. Mod 1 gears. With a castle creation motor but it clicks on acceleration and breaking worried something is wrong. Any ideas?

I use kinexsis 3000kv on 3s I run stock gearing(I assume is the problem) but it runs hot and want temps down any suggestions on pinion size

i've got the front skid plate removed, but i can't get the screw out to remove the bell crank what have i forgotten or done wrong? please help, frustrated and stuck

I have just gone brushless in my ruckus a goolrc 4600 kv but need a bigger pinion to gear it up already put traxxas vxl drive shafts on it kept breaking the original ones i ordered a 21t 48 pitch pinion but the teeth seem to course so i though i would ask to see if it is the right one if not...

I got me a ecx ruckus in February of this year. I have been running it maybe 2-3 times a week since I got it. An about a week ago, I decided to upgrade, so I ordered a goolrc 3665-3800kv motor combo. Yesterday I got in mail, I realized that the motor shaft was way to big for the stock pinion...

Hello, I have a ruckus 4x4 and I need to know the part number for the little cap for huge rod that holds the arm in. for the rear of the rc car. Thanks

Hi everyone im new to rc cars and was wondering how i could upgrade my 1/18 ecx ruckus to make it better so if anyone could help i would be very appreciative

Well I was planning on a savox 1256, but my rookie self doesn't wanna deal with a UBEC and all that comes with a Savox on stock ESC. So I am open to suggestions on another servo. Both the Hitec HS 5645mg and the HS 7985mg look promising. The 7985 looks little better, but I'm not sure if that...

Own a 1/10 brushless 2wd Ruckus. Will be putting savox 1256tg in this weekend with glitch buster and the rpm servo saver eliminator. Looking for a good servo horn. Not sure if i should stick with 20mm. Shorter? Longer? Suggestions? thanks

Hello all, I was hoping I could get some help. I have a brushed Ruckus that the motor blew up in. so naturally I went to a castle brushless system the 3800kv with a 15T pinon gear. I stripped the spur gear. the slipper was tighten "professional" by the local hobby shop. I ordered a metal...

Can i run a 3cell in a 2wd ruckus with a 5xl traxxas esc?

Hi, I bought a new Ruckus 4WD Brushless AVC. But it drove rather slow forwards, and fast backwards. Throttle trim and AVC was both set to zero, so I thought I had to re-calibrate the users manual: Done. Done. I do, but the green LED continues flashing after I release the SET button. It stops...

2wd ruckus seems to be kinda chattery

which is better overall not sure what to buy either the 1 18 ruckus or the 1 18 temper