ruckus

Looking at the specs on ECX's website, the 2WD brushless Tormet and Ruckus share the same gearing. Only the tires of the Ruckus are much much larger (132 vs 108mm external diameter). Seems weird, is it correct? Is the Ruckus overgeared or the Torment undergeared?

Hello guys! I bought a Ruckus 4WD with 3300kv motor and the tazer dynamite dyns2400. This things can work with a 3S lipo? thanks :)

Just installed the RPM rear hub carriers, or rather, the OVERSIZED rear hub carriers. They take a bigger bearing than the stock ones. Instead of 5x10x4 its 5x11x4 (if you pick these up, make sure you buy new bearings with them as they don't come with them). Yes, they say 1mm exponentially...

looking for a ball stud with 4.3mm ball and m4 threads anyone know of any possibilities?

I have rpm rear hubs on my 1/10 ruckus. Also have team associated adjustable steering and camber links with ecx ball studs. I've been having problems with the top mounting hole for camber links on the rpm hubs --the ecx ball studs slowly strip out, like the holes are a hair too large...

Thanks in advance for any help, I am fairly new to the RC world so go easy on me :) History: My brother gave my son and I a gently used ECX Ruckus 2WD brushless. Everything was stock. We had it out a few times and the 2400mAh battery that came with the truck was not lasting longer than 10-15...

Hello forum folks, I am relatively new to RCing, this past xmas I bought myself a new Ruckus 1/10 2wd with LIPO, and my 5 y/o son a 1/18 ruckus. We both have a lot of fun and upgraded from our stock batteries to ones with more mah for longer run times. I have a 2S 5000mah LIPO 20C battery, and...

Has anyone taken their tires and wheels apart? Three of my tires seem to have foam in them but one seems messed up. I think the foam is bunched up in one area so it's making the tire unbalanced. What are my options?

i'm looking at new brushless motors for my ruckus will a 5mm brushless motor fit? motor also comes with a 5mm 48p pinion and if it does fit, will there be any mods adjustments when going from 1/8inch to 5mm? or will it all work since i'm already running 48p stock? plus then couldn't also...

Turned on my Ruckus and ESC fan went up in flames. Those cheap little fans suck Smells really bad now after have to clean it up or maybe use as parts tuck and get new one.

is it even possible to convert a ruckus to 5mm pinion gearing? would it fit? or would there be a lot of modding involved?

is the 1/10 2wd ruckus considered a light or heavy duty monster truck? looking at new motors and they mention what application i'm just bashing my ruckus

Hey, new to forum, new to sport. Just got my 9 year old son an amp mt for $107 shipped to door, and i tried out for the first time, and I was officially hooked on these things. So, I found a ruckus, and just got it for $188 shipped to house. I can't wait, its the brushless 2wd nimh model...

I have a 1:10 4wd ruckus that I haven't run in a while. The battery pack reads 8v so I believe it is charged I think is a 7.2v. I put new batteries in the controller. When I turn it on, it starts up correctly but it will not go. If I lift it off the ground, I can get the wheels to run. I also...

What chassis parts would be needed to convert a ruckus to an amp. I know theres 3. Are there more?

I keep cracking metal gears in my ruckus. I run plastic spur 48p to 15t pinion 3000kv 3s. Metal shafts. I have steel gears ordered. Should I try running a plastic diff to try and make a different weak spot.

Are there any steel idler gears the would fit in the ruckus I always crack them. My plastic spur won't give from these bad crashes.

I just need a little help on finding out if the integy motor fan is waterproof/resistant.

I'm soon upgrading my 1/10 ruckus from 7 cell nimh to 2s LiPo. I want to gain a little top end speed considering switching from 87 to 85t spur gear currently have 24t (metal) pinion gear is plastic or metal better for spur gears?

getting ready to upgrade to a 2s lipo anticipating my stock plastic drive shafts breaking before too long suggestions for metal upgrades... seen mixed reviews on Hot Racing pretty new to hobby, so if i have to mod any, i want it to be a pretty simple mod and i've seen problems with some brands...