ruckus

Hey guys. Has anyone encountered a issue with there tazer 3300kv 45a brushless esc set up. Mine keeps doing this 100% power 50% power 0% power back to 100% power, repeats cycle over 30sec period. It does it with 6 different nimh batteries, 6 and 7 cells. Cold and warm motor. Its very annoying...

How do you tell when the slipper clutch needs adjusted?

Building a 2wd Torment club racer, and I am also builder a 2wd Torment basher over the winter months here. I have the stock Spectrum DX2E remote and stock receiver whatever number that is. Looking to upgrade to the next level remote for my racer, what is everyone running? I was looking at the...

Hey guys. Just a little thread on my new toys. I got a torment 4x4 and loved it, so i found a ruckus 4x4 brushless. After shimming, tightening and oiling them. I put 50wt shock oil in both trucks (no more bottoming out on jumps) added more pre load spacers. 7000cst oil in the diffs. 5100mah 6...

I purchased an ECX Ruckus 2wd base model for $189 12/29. Upon purchase I bought a 5000 mAh 2s lipo and castle sidewinder 3/4600kv combo. Threw it all on and not a full pack later destroyed the plastic gears. No surprise. Went down to my LHS and bought the metal gears. Not even a full pack later...

Hi All, So I have decided that I hate crawl spaces. However, I need to inspect mine more often, as the recent discovery of a dishwasher drain leak has proven. So... I have a Ruckus that I bought a while ago but don't use much (I live in a wooded area and kept driving it into trees). Anyway...

Hello my ECX Ruckus has been having problems, and has broken down in some way. When I drive it, it makes a clicking noise and doesn't accelerate. I thought I striped my gear, but I took apart my gear system and I didn't see a strip or scratch. Its been broken for a long time so I've been...

Took my Ruckus out for some fun in the snow before it got too deep. The stock tires are not very good in the snow, especially for turning.

I was wondering what the stock length for the shocks are so I can look into an upgrade so my truck handles better on the track with the stock shocks it is just too floppy and High up. It would be nice if you could recommend some good shocks that are shorter than the originals. I am liking for...

My 1/10 EXC Ruckus Monster truck has been upgraded to support 3S. Besides the battery and aluminum wheel hexes, only the ESC has been upgraded because the stock ESC Horizon Hobby limits its ability to 2S, even though the ESC's manual says it supports 3S. I'm not happy about the forced upgrade I...

I was having a lazy day today and decided to do some testing of my 32 pitch gears in my Ruckus, which turned into a session of doing backflips off a curb.

Had a blast last night doing some bashing with my Ruckus running a GoolRC 3930kv brushless motor and 120 amp ESC on 2S 35C lipo packs. Currently running a 20/90 48p gearing.

Hey all, been searching around, but couldn't find answers to some questions I have about upgrading from nimh to 2s lipo. My truck is a stock ECX03014 Ruckus brushless 2wd w/ AVC, with a Tenergy tb6 charger. https://www.horizonhobby.com/products/ECX03014 My goal is to have better and more...

I was working on my ruckus 4x4 (castle brushless) and found that my shock oil was terrible and needed replacement. Does anyone know what the stock oil weight was just so I can get a base line of what weight oil I could use to get similar preformance. Thanks!

ECX Ruckus Manual ECX Ruckus 2WD ECX Ruckus 4WD ECX Ruckus 1/18th ECX Ruckus 1/24th ECX Ruckus 2WD Parts List ECX2008 - Main Chassis ECX1028 - Servo Saver Set ECX2011 - Cover and Rear Mount ECX1050 - Setscrew M3x12 (4) ECX2015 - Foam Block ECX1098 - Motor Screw/Washer ECX1058 - Ball Stud (6)...

Last night I went to change my pinion, and ended up also changing my brushless motor from the 3900kv to a 5200kv. I am running a 22t pinion and the stock 87 spur. Today I got a chance to take it out in my small backyard area and have some fun with it. Shot some nice video of the bashing...

Here is a simple guide to show you how-to install the Traxxas VXL driveshafts onto your ECX truck. Parts needed: Traxxas 6852X Instructions: From the spot indicated on the image above, measure 1 1/8" and 1 1/4" inch in the direction that goes towards the END of the shaft where they meet...

ECX has done a great job with their ECX Ruckus but just like any other RC there are always places to improve. Below are a list of recommended upgrades for the ECX Ruckus 2WD and 4WD RC monster trucks. Required items for an ECX Ruckus Both the ECX Ruckus 2WD (ECX03003) and ECX Ruckus 4WD...

Took my new Ruckus out Saturday night with my friend to our weekly speed run and bashing location. Only thing I have done is to swap the 15t motor out for a waterproof GoolRC 3900kv brushless setup, and I run Floureon 2s, 3300, 35C lipo packs. I have the full edited video of our night on my...

i recently purchased a new 4x4 torment i am going to do the "cheap " brushless swap and swap to the metal differentials from the 1/14 losi mini and then pair with some metal axles that will fit if i can find any so this is the parts list for the metal gear diff swap my question is below 2x...