steering

  1. L

    Servo Problems

    Hi All, I am new to RC cars. I bought a 1:10 AMP 2WD monster truck for my son. At first it worked fine, then the steering went out. I found that the servo case was partially melted. Clearly some type of over heating/short in the servo case. I ordered a replacement servo (S6170 Standard Digital...
  2. BriaN

    Steering not working

    I was using my ECX amp, perfectly find, and now it does not work. The motor spun and the wheels moved, but the front two wheels did not turn on my ECX. I took out the Servo and tried out the steering, and it did NOT work, does anyone else have this problem? I fully charged my lipo and...
  3. D

    Is the receiver broken? Steering problem

    Totally new to RC cars and need help solving a problem with the electronics. Have an ECX torment that my son has been using. The problem is turning the steering wheel on the transmitter doesn’t cause the wheels to turn. I’ve tried a number of troubleshooting things. I was able to get the...
  4. Maarten

    Wobbel in my front tires

    Yesterday I drove my circuit. All went normal, but when I went into reverse I noticed that my car was jigeling around because of my front tires were so "loose". Is it cause of the standerd servo can't handle the wheels? If so (or not), how can I fix this ?
  5. G

    Steering issue

    On our new Ruckus 1/10 the steering servo is turning 75% either way, and then pausing before finishing the full turn. There doesn't appear to be anything blocking the steering arm. I have also tried adjusting the trim and the gain from the control to no effect. Any ideas? I am assuming the...
  6. R

    Steering Spindle

    Hi I was after a fix for this, both the screw and spacer have come out of the steering spindle and are lost, is there a way of fixing this? I can't find the spacer as a seperate part all I can find is this ECX214005 which is the complete set. However it seems that changing them to aluminium...
  7. Briguy

    Sloop in the steering

    Is there any way to get the sloop out of the steering. I can turn the wheels quit a bit before the servo moves. It looks like the connections. But i dont know if its a fixable thing or i have to upgrade something else. Thanks
  8. xlDooM

    How to fix AMP steering linkage design issue

    When you're making a lowish speed turn on a high grip surface, the turning circle is just massively better for a left turn. This can not be fixed with trim or an upgraded servo as far as I can tell. The problem is that the part of the servo horn that goes over the servo's outer drive gear...
  9. xlDooM

    steering linkage design issue

    I love my amp. However, one thing that just annoys me is that it turns left better than right. When you're making a lowish speed turn on a high grip surface, the turning circle is just massively better for a left turn. This can not be fixed with trim or an upgraded servo as far as I can tell...
  10. S

    boost steering upgrade

    my boost was sloppy in the steering dept, so I ordered a metal steering system off ebay for $30, yes it was high, but man it took care of the problem. no more sloppy steering.. I also upgraded the servo with hitech one!
  11. X

    RPM Servo-Saver Eliminator Install/ Review on Amp MT

    Many have posted about the RPM Servo-Saver Eliminator. I figured I'd do a more in depth look at the kit and install. RPM part# 73492 is the kit used for this install. It is done on an Amp MT, but the kit also fits the Boost, Ruckus, Circuit and Torment. RPM Servo-Saver Eliminator Bellcrank...
  12. X

    Amp steering wobble in reverse

    Well, today I finally received my Amp mt. My first thought is that this thing is slow....... But that's ok since it is for my 4 year old. I took it out briefly to check functionality before I handed it to my kid and noticed something annoying. When going in reverse the steering starts to...
  13. i_r_beej

    ECX AMP Associated B4/T4 steering "upgrade"

    The larger tired on the AMP cars easily overpower the stock servo saver in the AMP truck and buggy. I've gotten tired with the really vague steering (I've been spoiled by my Boost buggy's RPM steering assembly and MG servo) so I decided that I would try something to improve the steering while...
  14. i_r_beej

    ECX Boost RPM steering upgrades

    As part of my quest to create a Boost that's not just race-ready, but race-worthy, I've begun a series of upgrades featuring RPM's excellent after-market replacement parts. First up is the "RPM Servo Saver Eliminator Bellcrank." The set ships with Delrin bushings that are a good, close fit and...
  15. mrc82

    Rpm bell crank-has anyone installed this?

    So I purchased the bell crank servo eliminator from rpm. I also ordered the bearings to upgrade the bushings. What I need to figure out now is which servo saver to use
  16. Mikewilliams3530

    Steering wobble when backing up?

    what kind of suggestions are out there to help with a wobble from front wheels when backing up?
Back
Top