brushless

Thanks in advance for any help, I am fairly new to the RC world so go easy on me :) History: My brother gave my son and I a gently used ECX Ruckus 2WD brushless. Everything was stock. We had it out a few times and the 2400mAh battery that came with the truck was not lasting longer than 10-15...

Hello forum folks, I am relatively new to RCing, this past xmas I bought myself a new Ruckus 1/10 2wd with LIPO, and my 5 y/o son a 1/18 ruckus. We both have a lot of fun and upgraded from our stock batteries to ones with more mah for longer run times. I have a 2S 5000mah LIPO 20C battery, and...

I'd love to make my ECX AMP brushless - but I'm not exactly sure how? I found this brushless kit online: http://www.rcmart.com/leopard-sk30004204-ledpard-combo-p-36091.html?cPath=1560_1301#Review do I need to make any other changes to my AMP before getting this? Can I just get the kit and run it...

i'm looking at new brushless motors for my ruckus will a 5mm brushless motor fit? motor also comes with a 5mm 48p pinion and if it does fit, will there be any mods adjustments when going from 1/8inch to 5mm? or will it all work since i'm already running 48p stock? plus then couldn't also...

Can I pretty much run any 60A to 70A brushless esc with my stock tazer 3300kv brushless motor? Looking to upgrade to a better quality over my Tazer 45A ESC.

I have noticed that the kinexsis motor and esc combo is becoming more noticeable in the forums. I have had mine for about a year now and I like it alot. If you have any comments about the system, chargers and batteries, leave some comments. Thanks! I was thinking about getting the kx80 80w...

looking to upgrade my motor esc have 2wd stock brushless ruckus looking to get a 4000kv motor esc combo suggestions would be appreciated anyone heard anything on the kinexsis?

I'm soon upgrading my 1/10 ruckus from 7 cell nimh to 2s LiPo. I want to gain a little top end speed considering switching from 87 to 85t spur gear currently have 24t (metal) pinion gear is plastic or metal better for spur gears?

Whole new bird to me. Kind of why I got it and was real curious to use the avc feature. I like it. It has a a lot of pros and some cons. Getting to tube this thing is not going to be easy as they don't make things cut and dry. The slipper clutch, buried under 20 screws!!! And the motor mesh...

I use kinexsis 3000kv on 3s I run stock gearing(I assume is the problem) but it runs hot and want temps down any suggestions on pinion size

I am looking into esc, servo, and motors... is it better to get this as a combo pack? I have the ECX AMP MT... There are also so many different brands that I am lost!! I want to drive 40mph and have plenty of torque for bashing and jumping. I want to switch to LiPo eventually and I want to be...

I have just gone brushless in my ruckus a goolrc 4600 kv but need a bigger pinion to gear it up already put traxxas vxl drive shafts on it kept breaking the original ones i ordered a 21t 48 pitch pinion but the teeth seem to course so i though i would ask to see if it is the right one if not...

I have a 1/10 torment 4wd that runs on 2s lipos and have bought a goolrc 3300kv motor and esc but need a new pinion as the new motor has a 5mm shaft so I can't use the old one does anyone know what i need as im new to all this how many teeth and what ever else i need to know about it .

Well, my Gool RC 3500kv Brushless Combo arrived today so I thought I would take some pics and give my thoughts on the setup and performance since I know alot of people are curious of this system. First initial thoughts: Motor comes nicely packed in a small package with the motor wrapped in...

Hey all. I'm new to the forum but have been lurking for a while and gained a ton of knowledge. Thanks to all for the great information. I originally bought the 1:10 Brushless Ruckus for my son but had so much fun we bought a used Slash for him so we can both run the cars. Total blast and...

Post your favorite Mod

Hey all, It is time.....time to upgrade the torment to a brushless system. So using the expierience of you wise men and women I thought to ask you all what is the best setup(in your opinion) for the ecx torment. I bash 99.99% of the time to torque is what im looking for but with a good amout of...

Trying to upgrade my 1/10 torment 4wd to brushless. Have 19 pinion gear and a castle 3800kv motor. It now makes a whining noise when its together is this normal it never made this noise when is was stock. Im assuming the mesh is good and i think the slipper clutch isnt too tight. The spur gear...

So I was driving my Ruckus Brushless 2WD in the sand the other day and all of a sudden it stopped. The motor was making a louder, more grindy kind of noise and the wheels barely turned. I took it home and opened it up, and all the gears were intact. I'm guessing it's a diff or a motor problem...

Looking to upgrade your stock ESC and/or motor in your ECX RC? Now is a great time to take a look at Castle Creations as they are having a "garage sale" - http://www.castlecreations.com/products/garage_sale.html