amp

I bought a used AMP- I love it! I'm working on a few things: Making some turnbuckles and steering links Adding foam inserts without destroying tires Getting some slop out of the suspension Is there anyway to get the slop out of the a-arm hinges in front and back? I was thinking of making...

I'm running a rather powerful brushless motor and there seems to be more and more slop in the rear wheels (it looks lie it is at the hub level, not the arms). Bearings are holding up fine (Fast Eddy). Would aluminum hubs help with this? And if so, Hot Racing on ECX? Could the (stock) hexes also...

Hi all, first post here. My son bought an AMP MT BTD kit earlier this year after saving some Christmas/birthday money and I pitched in the last little bit to cover the cost. It's been a great experience for us so far and he did about 90% of the build work with me guiding him along the way...not...

Does anyone else have a problem with the motor shifting away from the pinion gear after jumps? No matter how much I tighten the motor mount screws the motor still shifts ever so slightly away and I have to stop running the car open it up and re adjust the motor. This is with an upgraded Kinexis...

I know bodies are a hot topic as the stock one isn't very strong and the size / shape of the car make it hard to find compatible ons. Here's the body of the FTX Bugsta (17.90€). Some small hobbyking body posts extensions in the rear and 4 holes later it's looking good! Amp baja bug body from...

I know most of the 2.2 buggy wheels out there don't fit on the front end because they rub the steering pivot. I haven't pulled my wheels off to measure yet, but I'm wondering if anyone's tried some of the plus sized wheels on an AMP with any success. Examples: JConcepts Bullet 60 mm rear...

I want to upgrade my AMP with a brushless motor (already have the metal gears installed). But I also don't want to break the bank either I would like to use my transmitter I already have. However the ecx13003 part seems to be out of stock everywhere will it come back if not is there an...

ok my sons amp burned up the servo. One minute it was working the next minute the steering gave out and after that smoke came from the servo. I just ordered a JX Servo PDI-6113MG with metal gears and I have a few questions. First off how hard is this to install. I don’t see any YouTube videos...

i just up graded my sons amp mt with a kinexis 4000kv brushless with included esc, metal gears, flysky GT-3C radio with included receiver, and a 5000mah 2s lipo. Car is now fast as f***. There are a few things I am not sure about. 1. The throttle trigger is reversed. When I pull back the car...

started out as a free roller with no body I got from a local rc fb page member.... he also threw in a stock motor..... brought it home, cleaned and lubed it.......installed a hobbywing quicrun 1060 I had from another rc that was unfixible and a goolrc radio from the same rc......ran it without a...

So I recently bought a 21t pinion cuz my esc was getting to hot with the stock 18t pinion the amp comes with. And for some reason the pinion screw keeps coming loose and striped the stock spur. I had the hot racing metal spur 87t and put that on and is now shaving the pinion!? I cannot win. I'm...

Guiding my son through set up for his race Amp. He added Traxxas adjustable camber turn buckles, repacked the diff with grease, and I’m helping him install a Kyosho Lemans esc with a full sensored Kyosho 19.5 motor. Gonna slow him down a little, but he will learn throttle control.

i want to find a cheap buggy i can turn into a racing buggy ik its a DB but i want to see if it can be like the kyosho ultima RB6.6 if any one could help me on this it would be awesome

So I like running the bigger tires on the amp. 2.8 duratrax lockup but they rub on the truck body when jumping. Should I just trim the body or is there a 2.6 premounted tires? Or is there a body that fits the amp that won't rub?

I bought my son an Amp last weekend and while he was driving it today, reverse stopped working. Everything else is good and working well. Any help with this problem is appreciated add I am new to rc cards and trucks.

so I have the castle combo 5700kv with the sidewinder3 esc.....the esc gets to hot after 5 min run time using a 20c 2s dynamite lipo. so the original on/off switch fried so I took the switch from the stock esc for the ecx amp and wired that switch to the esc...does anyone think that might be why...

I am very pleased with the fit and performance of this Hobbywing WP10BL50/3300kv combo. It was $44 shipped. https://www.aliexpress.com/item/50A-Waterproof-ESC-HSP-37017-03307-Brushless-Engine-Motor-540-3300KV-03302-Support-2S-3S-Lipo/32749658055.html?spm=a2g0s.9042311.0.0.ZfQPQx

https://hot-racing.com/?partnumber=ECT2206;c=983 or http://www.rpmrcproducts.com/shop/axle-carriers-caster-blocks/rear-axle-carriers/oversized-rear-axle-carriers-for-the-ecx-torment-ruckus-circuit-boost/

So I recently updated my gearing to the Ecx Metal gears. And I don't know if it's just me but is it supposed to make a clank sound when stopping and braking and slowly starting off? Should I put a grease on them?

Ordered the new radio,esc and servo for my amp kit. Radio is a Tactic ttx300 3 channel. I like these they are decent but not overly complicated and pretty rugged have one on my sawback and it works great. The 3rd channel can be made 2 3 or 4 position. Also its a small rx and no antenna wire...