amp

I'm thinking ofadding weights in the front of my Amp as it is pulling wheelies all the time (brushless setup and better tires, I race it with friends, no bashing). Has anyone done it? Noticed any problems like worse handling or no increase in wheel touching the group effect? If you've done it...

Since I wasted some money following what I read in another thread here's some info on Amp wheels: Duratrax and Louise ST 2.8 wheels: smaller diameter (100mm / 4.0"), you need the wheels with 1/2" offset to get the same width as the stock tires. If you want the same diameter more or less...

what transmission fluid weight should I use in the amp MT

Are there any tricks I can do to gain better performance out of my Amp's stock parts? I will be upgrading REAL slow over time. But for now want to know if and how I can milk all I can out of my Amp before spending hard earned dollars on upgrades. Thanks!

My son has the ecx amp truck with a Traxxas wheelie bar and the velieon motor and VXL-3s esc. It will fly. I also have a Traxxas Rustler with the same set up. They are both fast. Also we are running 3s 5000mah LiPos. Seems like they run forever. Also you really have to work the throttle because...

Hello, I got a couple of AMP's, one had the speed controler go out. I called Horizon Hobbies and they sent me a new one (for free!), however it is the upgraded one that can take lipos. So I attached it, took me forever to bind it, and now it will only steer the front wheels. I can't go...

I've been working on this AMP DB for a few months now, the over steer is killing me, how do you guys tackle this issue? In a straight line it hooks up like a dragster but, I have to corner awful slow. Outside of weight, what else can I do to make it handle better, specs in photo description but...

I would like to put a Traxxas slash body on my Ecx amp mt with the stock body mount so I would just drill some holes where it would go. But I don't know if it would be too long or to short, Too wide or too skinny. Could somebody help me.

My son has a ecx amp truck with the esc and receiver all in one. They say you can buy the ecx 13003 receiver and use the same remote. The ecx 13003 is on back order everywhere does any one know another way to use the same remote and just buy the receiver to up grade the esc?

My son got a new MT AMP for Christmas. Only ran about 4 batteries through it and after the last run it now only goes in reverse When we turn it on it beeps, pauses and then beeps three times. I think they get higher in pitch. We tried to re-calibrate it making sure: throttle not reversed...

Hello All, I bought an ECX amp MT for my son and he loves it. Together, This is our first hobby grade R/C car. We have been learning a lot and changing things out as we go but there is one thing i cannot find an answer to in the internet: We are running a Dynamite 60a ESC (DYNS2210) with a...

Messing around on break as usual and I over shot a wide turn and clipped the rear tower on a low metal beam. The tower came right apart. Anybody knew if there's an alloy fit? I suppose I shouldn't run at night without lights so far out of view...

IIRC when I built the Amp kit, and when I serviced my Ruckus 2WD brushless, the rear bearings were not sealed. I just bought an Amp RTR to make it into a cheap racing machine and the rear bearings are sealed. Just wondering if ECX changed this or if it's normal.

Hey all, New to the r/c world and would be great if some one can post upgrades and where to get parts. And what's the difference between 1800mah and 3800mah battery? Thanks

I plan on using this lipo battery https://wheelspinmodels.co.uk/i/278216/ and this lipo alarm https://www.ebay.co.uk/itm/321791745976 Will using this lipo battery damage my amp? Do I have to convert anything to make it lipo compatible? thanks alot in advance, any replies will be appreciated

I’ll make this as quick as possible. I got my son an Amp build kit last Christmas. I thought it would be fun and teach him some basic mechanics. My last build was a Futaba FX-10 many many years ago. We had so much fun with it, that I decided to get one for myself. I built mine with the Kinexis...

Anyone have an opinion on which Traxxis wheelie bar kit is easiest to adapt to add to the Amp? Anyone know why ecx doesn't make their own?

Anyone run one of these in the amp mt? I ordered (2) 4000 mah 20c but got the 5200 50c instead. Im thinking they will be too big to run with stock battery strap.

Hi there, I was wondering if any1 has converted the Amp Mt into a Short Course Truck or even if it is possible. Post ur pic pls if u have done. TIA

Hi i have a brushless AMP MT with a Gens Ace 6000mah 70c 2s LiPo with a sensored castle creations sidewinder 3 and a sw-0231mg water proof Savox servo and a fly sky transmitter and receiver and looking to get better tires/wheels, shocks, body shell, bearings and not sure what they are called but...