torment

  1. C

    Roost vs Torment 1/18

    Pretty new to the ecx brand. Just bought a amp for son. Im wanting to get a 1/18 scale rc and been debating on the roost or torment. Is there a big difference between the two? Any idea roughly how fast the two go? I've seem some say around 15 mph up to around 20mph. Thanks
  2. KyleRC

    Looking for thicker body for ECX torment

    i started racing my ecx torment about a month ago and it does great but I have had the body fall off a few times because the holes for the body posts broke open and it falls off easily. I was looking for something a little stiffer and was wondering if anyone has had any luck using proline or...
  3. C

    Anyone running 3S LiPo on 2wd Torment?

    Anyone running 3S LiPo on a 2wd Torment? If so, please let me which motor/esc/pinion/spur you’re using and if you’re getting any heat issues. Wanting some inspiration for the next upgrade :)
  4. Jp1ruckus

    Torment 4x4 larger diameter wheels.

    Hey guys. Im looking for a set of wheel no wider than stock torment wheels (45-50mm, so its no more stress on the servo and fits right to the body). But ruckus diameteror so. So its more capable off road. The 4x4 chassis is so low it gets stuck to often. So would be nice to swap tyres to the...
  5. AK4WD

    Torment Winter Drive. 4x4

    Castle SCT system, 10,000Mah battery, regular ol' Go-Pro
  6. kruzracing169

    DX2E remote/transmitter/receiver upgrade....

    Building a 2wd Torment club racer, and I am also builder a 2wd Torment basher over the winter months here. I have the stock Spectrum DX2E remote and stock receiver whatever number that is. Looking to upgrade to the next level remote for my racer, what is everyone running? I was looking at the...
  7. Jp1ruckus

    Ball pivots for 1/10 4x4s

    Hey guys. Has anyone experimented with ball pivots on stock camber/steering links to get rid of some play. The plastic links are good its just the ball pivots that let them down. Ive tryed a thick grease on the off chance that might tighten them up but its to messy and didn't do much. Stupid i...
  8. Jp1ruckus

    Ruckus and torment 4x4

    Hey guys. Just a little thread on my new toys. I got a torment 4x4 and loved it, so i found a ruckus 4x4 brushless. After shimming, tightening and oiling them. I put 50wt shock oil in both trucks (no more bottoming out on jumps) added more pre load spacers. 7000cst oil in the diffs. 5100mah 6...
  9. S

    Motor runs when I connect battery? help

    Hi, have a 4wd Torment, and recently changed the motor (the old one had a loose connector inside). Got the new motor (exact same one), and when I plug in the battery, it just runs full throttle. I have the transmitter on, and it steers, but can't get the throttle change at all. any help?
  10. Cubekid1315

    Fully modifying an 1/18 torment

    Recently got a 1/18 torment and was considering modifying it, and well go big or go home... How can I fully modify this thing, like best parts best motor, best everything? Can you guys help me out?
  11. BowHunt3r

    First R/C purchase

    Hello, I am purchasing a 1/10th ECX Torment Short Course Truck for my son. We do not have a hobby shop within 60 miles so I want to get everything I need to get him started. I want add a second battery and a faster charger. Also what tools will he need to work on it? and what extra parts should...
  12. J

    Brushless upgrade for ECX Torment?

    Looking to upgrade my torment to a brushless system. Any suggestions on what motor/ESC to go with? Not looking to spend a fortune so don't need the best of the best. Just something dependable. Probably stay with 2S Lipo. I run my car couple times a month if I'm lucky. Also what other...
  13. Nightfox_86

    Help, rear diff issues

    About a week ago, I bought a ECX Torment 1/18 SCT and after a couple of times using it, i start to notice that the rear diff was acting strange. It felt like it was jamming, and when every time i accelerated the car, it made an awful gear grinding noise. I have taken off the rear diff to inspect...
  14. J

    Torment body noisy

    The body on my Torment rattles around like crazy and makes a ton of noise. any suggestions on ways to fix this? It's not a big deal but I'd love to fix it somehow
  15. J

    ECX Torment stock tires

    I have a 2wd Torment brushed model, no upgrades. I feel like the tires just do not bite on any kind of loose surface. But it also could just be that I suck at driving. Does anybody have any feedback on these tires? They are great on pavement, but in the dirt I'm spinning and fishtailing...
  16. J

    Differential upgrade question

    So by upgrading to the Losi mini diff the part number says “diff housing “ does it mean the actual differential case or only the gears inside... I just don’t know weather to order the entire metal diff case or only the metal gears and use the plastic housing
  17. J

    First Rc build looking for specific tips plz 1/18 torment

    i recently purchased a new 4x4 torment i am going to do the "cheap " brushless swap and swap to the metal differentials from the 1/14 losi mini and then pair with some metal axles that will fit if i can find any so this is the parts list for the metal gear diff swap my question is below 2x...
  18. A

    1/18 Torment NiHM to Lipo

    I am fairly new to the hobby and recently purchased a 1/18 Torment for me and my son to mess around with, with a NiHM battery that came with it, but was wondering if I could use a Lipo battery or if there would need to be some electronic parts upgraded or changed before I could do this.
  19. Moldorak

    Brushless Ruckus / Torment question

    Looking at the specs on ECX's website, the 2WD brushless Tormet and Ruckus share the same gearing. Only the tires of the Ruckus are much much larger (132 vs 108mm external diameter). Seems weird, is it correct? Is the Ruckus overgeared or the Torment undergeared?
  20. Vetteboy55

    Got the Torment today

    Got the Torment today played around with it some. Sure seems like it will be fun to mess with it. Grandson is all pumped about getting to run it. Should be fun any ideas on upgrading it for endurance.
Back
Top