4x4

So I keep reading that 2WD Slash rims fit, but on the 4x4 Torment is it Slash front or Slash rear rims?

Just for fun...overpowered of course! On road @ twilight short speed run bursts PR. Honest. *** 72 MPH *** for 2 secs...and without crashing! Wheelies mid way too...lol Specs...not rtr but trial and error. Chassis - ECX Torment 1/10 (2nd) Bumpers - T-Bone Racing Body - ProLine Brute MT...

After much throwaway brushed esc wheels shocks hubs spurs... Stock Mobil 1 syn greased f/r metal diffs... 13T+39T 1:3 ratio after breaking 4 sets with diff fluid... since April 2019. Stock 3rd center alu driveshaft on broken diffs 4S 50C basher... Hobbywing 4268SL 2600kv 5mm brushless motor...

Hello, Rookie here. Just picked up used 2wd Ruckus and 4x4 Ruckus: - The 2wd steering behaves as I would expect - The 4x4 it seems like the wheels don't really turn as far - If the vehicle is stationary I can hear the servo moving but the wheels don't turn as far in either direction as my 2wd...

Hey so I blew a tire on my 1/10 ruckus 4wd and I replaced the rear tires with a different set of the same size. The new tires didn’t balloon the same as my front tires and now I have a stripped diff. I can only find a complete diff but I only need the inside gears. You can buy the diff case and...

Should I start with the 2WD or 4WD? I have read the different the pros and cons for both, and I would like to know; If you could start all over how would you do it or what would you buy first?

What aftermarket upgrade is there available for shocks looking to start upgrading things on my 1/10 rukus 4x4 monster truck

Im new to rc i have a 1/10 ruckus 4x4 In 4 days managed to motors onfire through use Day 1 factory motor 13t 550 Day 2 new motor Day 3 made it 2wd 15t 540 Day 4 15t 550 titan 4x4 again Hobbyshop guy has no idea how to help me Any ideas plsthe motors almost all look like below after

Hallo, I would like to have all the information about the possibility to use the Torment 4x4 with 3S Lipo batteries and putting on a brushless system (3600kv motor) Samurai combo maybe. I have to change transmission using metal gears? Where buy the up? Thanks

Where can I get after market front drive shafts or know anyone that has them?

Can rukcus run a 4s lipo. On a stock chassis. Depending on what esc upgrade and motor

brought the ruckus 4x4 brushless rc two days ago was over a friends and was charging my battery. I ended up grabbing the wrong battery and hooking it up to my ruckus . Went out played with my ruckus for about 10 mins and lost throttle , what is wrong with my ruckus ???

Hello Does anyone know where I could get a metal mod 1 spur gear for my ecx ruckus 4x4 because I stripped the other and the motor no longer is able to power it so I could get another plastic one or I want to see if I can get metal one Thanks bye

So is there a reason there is barely any aftermarket parts, or even upgrade parts from ECX for the torment 4x4? I can't even find RPM A-Arms, only for the torment 2wd, would those work on the 4WD?

What's the ideal pinion size. I do mostly bashing.

Looks like the V4 ECX Ruckus 4x4 and ECX Torment 4x4's have just been announced and are expected to be available in early June! I really like the new paint jobs on both trucks!

Just your thoughts. Goolrc 3500 KV 60 amp esc 5200 3S lipo. Should be pretty much the same as the traxxas 4x4 with brushless and 3 s lipo. Anybody out there running something similar to this ?

Not sure if this has been addressed but just wanting some input. It seems that the front body mounts keep snapping in the same exact place. I have replaced them twice and am now looking for some alternative solutions. Has anyone else had this occur? Looking for any input. I am currently running...

Hi all, I have owned my 4x4 Ruckus for a couple years and I really want to upgrade it. I have replaced the front and rear bumper with T-Bone Racing, and just replaced a worn out Spur gear. Now I lost a front driveshaft, so I need a replacement. I think Hot Racing is what I will go with...

I've broken several front driveshafts and front axles on my 1/10 4x4 Ruckus. Running stock motor with (non 3S restricted) Dynamite Tazer 45A ESC with 3S and stock tires. What brand driveshafts are you using? Which ones are the most durable? For installation, please explain any mods that may...