amp

Hi guys, I have bought an amp db ecx buggy about a week ago and I want to turn it to a drift buggy... I have already bought the stock battery but the 5100mah version along with the following wheels: http://www.wheelspinmodels.co.uk/i/212064 It has also been lowered all the way with full front...

So I did some upgrading on my Desert Buggy... :cool: Kinexis 4000Kv with ESC T-Bone front and rear bumpers GPM front and rear shocks Boom Racing front shock tower Boom Racing front arms Hot Racing front hubs TrackStar TS4G Tx/Rx Also bought the Hot Racing SECT288 CV axles, but ruined the first...

Well, I just ordered: -Hot Racing's Star Drive Steel Cv 2wd ECX drive shafts -32 pitch spur and pinion gears That will do it. Nothing left to upgrade, the only thing stock is the chassis and front shock tower. This truck has turned into something awesome!

Replacement shoulder screws turned up.. 3 different sizes ? i assume its the smaller 4 screws ? then went on to remove the hex nut as to remove the wheel for access and nothing.. any help appreciated. Thanks.

First impressions: the narrower front tires don't really make a difference on grass, where the steering performance is quite marginal. The weak link is obviously the servo saver; it simply opens up all the time while you are skittering across the lawn. Jumping balance is also the same, for the...

So after a good run session with my son. I brought the tuck back in to go out for dinner. I noticed that motor and ESC were very hot. I forgot my temp meter so I have no idea of what it was. But I could say it was past the two second finger method. When I got back I finished replacing the...

Hello guys, my almost 4 years old son and I have 2 amp mt at the moment. We started with some accessories because 9 hours for batteries charge wasn't an option... After having tons of fun with them and bashing them very hard, what should happen, happened... Broken parts : For this one I...

My parents are getting an amp mt for my son for his 6th birthday (best grandparents ever), and I'm wondering if the torment bumpers will fit for a little more protection. I have seen slash bumpers on rustlers so I was just curious. Thanks in advance.

I have two questions regarding the difference between the Amp desert buggy and the Amp monster truck: 1) is the front shock tower vulnerable on the buggy, since it is not protected by the body and could burrow into the grass/dirt? 2) does the desert buggy also make that godawful body slap noise...

Post your favorite Mod

Hey, all. So, I know that the AMP's share parts with the Circuit Stadium Truck (everything except the rear shock tower, as far as I can tell), but I've also read here and there about crossover from the Boost and at least one other, though the name escapes me. Does anyone know all the...

I have a stock amp that is getting more street use then off road use. I dont want to burn up the stock tires on the road.

So my AMP is one month today. This is what I did today. - Extreme racing G-10 chassis extension. -fitted the torment front and rear bumpers, this needed some modifications. -fitted the torment shock towers and body mounts. The car is handling amazing, I'm able to keep the front end down...

I have an Amp I share with my son. I went to the beach today and it was tons of fun. I managed to lose both screws that secure the spindle to the caster block, but I guess a good bashing session ends with something broken :P However, it wasn't fast enough for the beach. All that open space, the...

When you're making a lowish speed turn on a high grip surface, the turning circle is just massively better for a left turn. This can not be fixed with trim or an upgraded servo as far as I can tell. The problem is that the part of the servo horn that goes over the servo's outer drive gear...

Has anyone ever taped tires? Is it something I can do to my tires or would it be better to buy new wheels, foam, and tires or just do it to the wheels I already have. I really don't want to buy everything again, as I have 90$ worth or mounted prolines. Below is a video of my tire doing to...

Well took the kids over to a local bike track with the AMP and Ruckus to let loose on the jumps... I think i solved the problem i was having with my steering servo arm, and we had a great time and the kids helped prove the durability of the trucks once again. Sometime into blatting over a...

For some reason my Amp MT won't work randomly today. Tried with two batteries, car turns on fine but when I turn on the TX all I get is beep-pause-beep-pause and the ECX is flashing red. There's no re-bind procedure that I can see so I have no idea what or where to go next.

Any recommendations on keeping down the front end? I have read about adding lead weights to the front, but I am worried it will nose dive after a jump.

I love my amp. However, one thing that just annoys me is that it turns left better than right. When you're making a lowish speed turn on a high grip surface, the turning circle is just massively better for a left turn. This can not be fixed with trim or an upgraded servo as far as I can tell...